The wattages are typical figures from generator makers' charts. Your appliances may differ, so check the data plate and add your own items with exact numbers.
How the generator calculator works
GeneratorSize multiplies each appliance's running watts by its quantity and adds them up. For every appliance it works out the extra starting surge (starting watts − running watts) and adds only the largest one, assuming one motor starts at a time. The recommended running rating is the running total plus your headroom, rounded up to 10 W. Current is watts ÷ 120 V, or ÷ 240 V for a 120/240 V generator with the load split evenly between its two legs.
Biggest starting surges in the list
| Appliance | Running W | Starting W | Extra surge |
|---|---|---|---|
| Central AC 3 ton (240 V) | 3,500 | 10,500 | 7,000 |
| Air compressor 1 HP | 1,600 | 4,500 | 2,900 |
| Window AC 10,000 BTU | 1,200 | 3,600 | 2,400 |
| RV air conditioner 15,000 BTU | 1,800 | 3,500 | 1,700 |
| Furnace fan ½ HP (gas or oil furnace) | 800 | 2,350 | 1,550 |
| Refrigerator / upright freezer | 700 | 2,200 | 1,500 |
| RV air conditioner 13,500 BTU | 1,500 | 3,000 | 1,500 |
| Garage door opener ½ HP | 875 | 2,350 | 1,475 |
Generator types by size
| Running watts | Typical type |
|---|---|
| Up to 2,500 | small inverter generator (about 2,000–2,500 W) |
| 2,500 – 4,500 | mid-size inverter or portable generator |
| 4,500 – 12,000 | large portable generator |
| Over 12,000 | home standby generator |
Wattages are typical figures of the kind published in generator makers' wattage charts; real appliances vary with age, size and efficiency, so use the data plate where you can. Have an electrician install any transfer switch or interlock, run generators outdoors away from windows and doors (carbon monoxide), and use a CO alarm indoors.
Frequently asked questions
What size generator do I need to run a house?
For essentials (fridge, sump pump, furnace fan, lights, microwave, TV and chargers) about 4,600 running and 5,400 starting watts. Whole-house loads with central AC and electric water heating need a standby generator.
How do I calculate generator size?
Add the running watts of everything that will run at once, add the largest single extra starting surge, and choose a generator whose running and starting ratings both exceed those numbers, ideally with 10–20% headroom.
What is the difference between running and starting watts?
Running (rated) watts are what the generator supplies continuously. Starting (peak or surge) watts are a short burst for motors to start.
Is GeneratorSize free?
Yes, with no sign-up or ads.
Is my list saved?
Yes, in this browser only.